Skip to main content

Troubleshooting Guide: How to Fix Brother Printer Not Printing Issue

 Brother printers are known for their reliability and high-quality prints, but like any other electronic device, they can sometimes encounter issues. One common problem faced by users is the Brother printer not printing, which can be frustrating especially when you urgently need to print something. However, worry not! In this blog, we’ll discuss three effective methods to troubleshoot and fix the Brother printer not printing issue.

How to Fix Brother Printer Not Printing

Method 1: Check Printer Connection The first step in troubleshooting any printing problem is to ensure that your printer is properly connected to your computer or network. Follow these steps:

  1. Verify that the printer is turned on and connected to a power source.
  2. Check the USB or Ethernet cable connections between the printer and your computer. If using a wireless connection, make sure the printer is connected to the correct Wi-Fi network.
  3. Restart both your printer and computer to refresh the connection.
  4. If using a wireless connection, try moving the printer closer to the Wi-Fi router to improve signal strength.

Method 2: Verify Printer Settings Sometimes, incorrect printer settings can prevent your Brother printer from printing. Here’s what you can do:

  1. Open the Control Panel on your computer and navigate to Devices and Printers.
  2. Right-click on your Brother printer and select “Printer Properties” or “Properties.”
  3. Check the print queue to ensure there are no pending print jobs that might be causing the issue. If there are any, cancel or delete them.
  4. Make sure that your Brother printer is set as the default printer. Right-click on the printer icon and select “Set as default printer” if necessary.
  5. Ensure that the printer status is set to “Ready” and not “Offline” or “Paused.”

Method 3: Update or Reinstall Printer Drivers Outdated or corrupt printer drivers can also lead to printing problems. Follow these steps to update or reinstall the printer drivers:

  1. Visit the official Brother website and navigate to the support section.
  2. Enter your printer model number and download the latest drivers for your operating system.
  3. Once downloaded, install the drivers following the on-screen instructions.
  4. After installation, restart your computer and try printing again.
  5. If updating the drivers doesn’t resolve the issue, try uninstalling the printer drivers completely and then reinstalling them from scratch.

Conclusion: Encountering issues with your Brother printer not printing can be frustrating, but with the right troubleshooting steps, you can quickly resolve the problem and get back to printing smoothly. By following the methods outlined in this guide — checking printer connections, verifying printer settings, and updating/reinstalling printer drivers — you should be able to fix the issue and enjoy uninterrupted printing once again. If the problem persists despite trying these solutions, don’t worry just dial our toll-free +1855–201–8071 support number. Our expert will guide you.

Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

Fixing Common Brother Printer Issues: Troubleshooting When Your Printer Won’t Print

  Brother printers are renowned for their reliability and quality, but like any piece of technology, they can encounter issues from time to time. One of the most frustrating problems users face is when their Brother printer refuses to print. Whether it’s a busy office environment or a home setup, a malfunctioning printer can disrupt productivity and cause unnecessary stress. Fortunately, many common printer issues have straightforward solutions that can get you back to printing in no time. 1. Check the Basics Before delving into more complex troubleshooting steps, it’s essential to ensure that the basics are covered: Power:  Make sure the printer is powered on and connected to a functioning power outlet. Connection:  Verify that the printer is properly connected to your computer or network. For wired connections, ensure the USB or Ethernet cable is securely plugged in. For wireless connections, check the Wi-Fi or Ethernet connection. Paper:  Ensure there is paper in ...
Post a Comment
Read more

How to Find Brother Printer WPS Pin?

Hello there, if you're looking for a way to connect a brother printer to wifi using the WPS method, this is the blog for you. This guide will assist you in locating or regenerating a Brother printer WPS pin . WPS (Wi-Fi Protected Setup) has two methods of operation: the WPS push method and the WPS pin method. If wifi direct is enabled on the printer, the printer may request a wps pin; however, there are other methods for brother printer wireless setup. Few people are aware that you can connect your wifi printer to your smartphone and computer without the use of a router or access point by using the wifi direct feature and the wps pin on your brother printer. The wps pin on the router can also be used to connect the printer to a wireless router or access point, but these two methods are not the same. Where Do You Find the Brother Printer WPS pin ? When you first set up your Brother printer, it may ask for your WPS pin. Here's how to locate and activate the brother printer wps pi...
Post a Comment
Read more

How to Setup Brother Wireless WiFi Printer

  Are you concerned about how to set up a   Brother printer  on a wireless network? To set up your printer, read this article. Follow the instructions for connecting a printer to a WiFi or wireless router on a Windows, Windows 10, or Mac computer. As a result, configure the printer's features and you're ready to connect to Wi-Fi in your home or office. How to Connect Wi-Fi on Brother Printer- Unpack the printer, install the Brother software, and you're ready to print wirelessly.  First and foremost, restore the printer's factory settings.  Turn off the printer and simultaneously press two buttons on the top panel (buttons with an antenna and a cross).  Turn the device on. After turning on, hold the keys for 10 seconds until the orange and green LEDs blink.  Connect the Brother printer to a Wireless Network Using the Router's WPS Button.  On the printer, press the antenna button (top button in the picture above). Press the WPS button on the Wi-Fi r...
Post a Comment
Read more